The Ultimate Guide to Setup Amped Wireless SR300 Extender
Have you just purchased an Amped wireless SR300 range extender? Are you looking for a guide to set it up? Well, you have reached the right post. Here, we have discussed the detailed process to help you setup Amped wireless SR300 extender. So, read on.
Before You Setup Amped Wireless SR300 Extender
To configure your brand new Amped wireless SR300 range extender in a hassle-free way, you need to get access to some information and a few things mentioned below:
- A power socket
- A network cable that transmits data at higher speeds
- The default web address of your Amped wireless SR300 range extender
- An already installed router
- A web browser to open the Amped wireless extender setup wizard
Now, let’s head over to the process to setup Amped wireless SR300 extender.
How to Setup Amped Wireless SR300 Extender?
Step 1- Power Up the Extender
Start the setup process by powering up your brand new Amped wireless SR300 range extender. For this, plug it into a wall socket that is situated near the host router. However, you need to verify that the wireless extender is getting a consistent power supply. Once ensured, get ready to give a shot to the next step.
Step 2- Connect Extender and Router
Now, it is time to create a connection between your Amped wireless SR300 extender and the host router. So, get access to a network cable and use it to connect your WiFi devices. Make sure that the connection is stable. Just in case you don’t want to go for a wired connection to setup Amped wireless SR300 range extender, you can take the help of a wireless source.
Step 3- Open a Web Browser
Once a successful connection is established between your host router and Amped wireless SR300 range extender, pay attention to your PC and switch it on. Thereafter, run an already installed web browser on it. Any web browser like Google Chrome, Apple Safari, Mozilla Firefox, Microsoft Edge, etc. can be used.
Step 4- Access setup.ampedwireless.com
Navigate the mouse cursor to the location (address) field of the internet browser and type setup.ampedwireless.com into it. For your information, setup.ampedwireless.com is the default URL of the Amped range extender. It acts as a gateway to setup Amped wireless SR300 range extender. So, you need to be very careful while entering it. Pressing the Enter key after entering setup.ampedwireless.com will shift the window to the Amped wireless SR300 setup dashboard.
Step 5- Follow On-Screen Prompts
As soon as the dashboard of your Amped SR300 extender appears, you will see various prompts. Now, you need to follow each prompt carefully in order to setup Amped wireless extender. Once you are done following those instructions, a Congratulations window will appear indicating that you’ve completed the installation process.
In this manner, you will be able to setup Amped wireless SR300 extender with ease. Are you ready to reap its benefits now? What happened? Did something stop you from installing your Amped device? Well, it seems that you lacked somewhere. So, walk through the next section and know what might have stopped you from doing Amped setup successfully.
Can’t Setup Amped Wireless SR300 Extender?
1. Did You Use a Working Wall Socket?
Most users forget to check the condition of the wall socket before powering up their Amped extenders. Did you check the same? No? So, do it right now. In case the wall socket is found damaged, then consider plugging your Amped SR300 extender into another one. Now, check if you are able to setup Amped wireless SR300 range extender or not. In case you are still failing, check out the next tip.
2. Is the Extender-Router Connection Stable?
Creating a finger-tight connection won’t help you to achieve Amped setup success if the network cable in use is damaged. Know that using a damaged Ethernet cable for setting up the extender increases the chance of signals getting affected by external noise. Thus, always use a non-damaged Ethernet cable for connecting your Amped wireless SR300 extender and router. In case you have created the extender-router connection with the aid of a wireless source, keep the distance between your devices optimal.
3. Did You Use an Updated Browser?
Yes, we said that any web browser can be used to setup Amped wireless SR300 range extender. But, that web browser needs to fulfill a few conditions that are mentioned below:
- It must be running on the latest software version.
- All of its cache, cookies, and browsing history must be cleared.
After taking help from the aforementioned points, you will be able to configure your Amped wireless SR300 extender. FYI, after installing the extender, you need to assign a username and password to it to prevent unauthorized access.
Installing an Amped SR300 extender in the house is all about turning dead zones into fun zones. Hopefully, the above sections will help you setup Amped wireless SR300 extender with ease. Just in case you are still endeavoring to make your device operate, consider getting in touch with our experts for immediate help.