In-Depth Guide to Change Admin Password of Amped Extender
Millions of WiFi networks are hacked due to weak passwords. Does your Amped WiFi extender also have no admin password? If you have answered the question in yes, then your Amped extender’s security is at risk. After completing the Amped wireless setup process, it is advised to change admin password of their extenders. Else, you won’t be able to protect your home WiFi network from falling prey to unauthorized users.
Wondering how to change admin password of the Amped wireless extender? Well, the purpose of this write-up is to make you familiar with the correct steps to assign a new login password to your Amped WiFi extender. So, without wasting time, let’s get going.
Steps to Change Admin Password of Amped Extender
I. Connect WiFi Devices
Let’s start the process of assigning a new admin password by connecting your Amped range extender to the host AP. For this, make sure that your host AP is properly configured and is in continuous connection with the Amped range extender.
For flawless communication between your devices, an adequate distance must separate them. It means you can neither place them too close nor too far. The reason is farther distance results in no communication whereas closer distance leads to a clash of WiFi signals.
II. Switch On Your PC
To change admin password of your Amped wireless range extender, you need to have access to a PC. Just in case you don’t have one, a laptop can be used to get the password changed.
However, you need to ensure that your PC or laptop is not infected by viruses or malware. Additionally, the OS of the PC must be updated. Else, you will face unexpected delays during the password-changing process.
III. Load a Web Browser
As soon as your PC or laptop becomes ready for use, open an internet browser like Google Chrome or Mozilla Firefox. Like the OS of your PC, the software version of the internet browser should also be updated. If not, then do it right away. It will help you change admin password of the extender without any hiccups.
In addition, navigate to the Settings section of the web browser and check if there are unnecessary files saved on it. If yes, then delete them to prevent the loading of the cached Amped login page.
IV. Access setup.ampedwireless.com
The next step in line is to access setup.ampedwireless.com. It is the default gateway through which you can reach the Amped extender’s web-based management page. So, move to the URL bar of the internet browser and type setup.ampedwireless.com into it. Press the Enter key.
Keep in mind that the default web address can be accessed through the URL (address) bar only. It means you cannot use the search bar. Breaking this rule might create hurdles while you change admin password of your Amped range extender.
V. Change Admin Password
The moment you press Enter, the dashboard of your Amped extender will appear. Navigate to the Management tab and click it. Thereafter, click the Password Settings option. You will be taken to the Password window.
Now, type the new admin password for your Amped device into the New Password field. Once done, verify the password by re-entering it into the Confirmed Password field. Lastly, click Apply and let the changes come into effect.
In this manner, you will be able to change admin password of your Amped wireless extender. Now, you have to use the new password to log in to Amped range extender. In case you face any issues while doing so, take the help of the tips outlined below to get success with the password-changing process.
Tips to Successfully Change Admin Password
- Your Amped extender must be getting a continuous and fluctuation-free power supply. It will be possible only if the power socket to which your WiFi device is connected is not damaged.
- If the wireless connection is unstable and not allowing you to change admin password of your Amped extender, go for a wired connection. But, make sure that the Ethernet cable being used is not worn-out.
- Stay on the Amped wireless extender setup wizard and wait patiently after clicking the Apply button. Else, the changes you have made to your Amped extender won’t become effective.
The Bottom Line
Changing the admin password of the Amped range extender is the first step to securing your home network. We hope that you will be able to change admin password and add a security layer to your Amped extender with the help of the steps discussed above. Feel free to contact our experts at any hour of the day to know other Amped extender security tips.